Installation

Some of our products will come fully welded as one piece and ready to use straight away. Some of the items will require assembly. Installation of all our products, apart the beds, should be straight forward and fairly self-explanatory.

Your experience when building our beds and other products is important to us. If you have any recommendations for improving our assembly instructions please use the contact us and let us know what you think!

Assembly Instructions

If you have purchased a bed frame – now it’s time to set up your dream bed! Assembling your new bed is not a difficult process, but please be careful when moving bed parts, as these beds are made of steel, which are bulky and in some cases very heavy.

It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to avoid scratches and damaging the product or the floor.

This is not a job for one person. We recommend that all our beds are installed by at least two persons capable of lifting or moving heavy objects.

In the packaging you will find all the components required to build the bed including the slats, bolts, nuts, washers, screws, padlock (if applicable) and a spanner. Do not discard any packaging until you are sure you have all the parts and fittings. As mentioned before, you will require another person to assemble your new bed.

All our bed frames will come with relevant instructions, but if they are, for some reason, missing, here are the very basic steps to follow.

You will find that all the components are labelled with stickers and coded with letters or numbers. All the components are also labeled explaining their location.

1. Headboard – Start with the parts labelled with orange colour stickers and marked with letter ‘A’. Sticker marked ‘A1’ will need to be aligned with ‘A2’, ‘A3’ with ‘A4’ etc. Align the headboard holes with column holes, add a washer to the bolt and push it through the headboard into the column and tighten it with the provided spanner.
2. Once the headboard is built, add parts labelled with blue colour stickers and marked with letter ‘B’. Please, align sticker marked ‘B1’ with ‘B2’, ‘B3’ with ‘B4’ etc.
3. Footboard – the parts required to build footboard are labelled with yellow colour stickers and marked with letter ‘C’. Please repeat the same steps as previously and align sticker marked ‘C1’ with ‘C2’, ‘C3’ with ‘C4’ etc.
4. Once the bed frame is build, add the slats and fix them in place using the provided screws.
5. Place your mattress on top and…Enjoy your new bed!

If you have any questions that these instructions do not answer, please get in touch and we will be happy to help you.